How to choose a suitable gearbox?

To choose a suitable reducer, you need to consider your use characteristics, input speed, output speed, required torque and other factors.

2023-01-29

Are servo motors AC or DC?

Servo motors are a type of electric motor that is designed to provide precise control of the motor shaft position, velocity, and acceleration. Servo motors are

2023-01-21

How to convert ac motor into generator?

Converting an AC motor into a generator can be a useful and cost-effective way to generate electricity for a variety of applications. The process of conversion

2023-01-19

How often should I clean my laser engraver?

Clean and lubricate the X-axis linear rail of laser engraver with 0.1ml grease from syringe every two weeks to maintain the motion system properly. Always clean and lubricate the X-axis and Y-axis rails after working with materials that produce lots of de

2023-01-19

Sales case: Servo motor for bread baking line production

Part I: Customer requirementsIn May 2022, a customer Kirill Vachaev from Russia left a message on Lunyee's website that he needed servo motors. Later, durin

2023-01-18

Do ac motors have magnets?

AC motors are electrical machines that are commonly used to convert AC electrical energy into mechanical energy. AC motors are typically powered by an AC power

2023-01-18

How does a squirrel cage induction motor work?

In a squirrel cage induction motor, the field windings in the stator of an induction motor set up a rotating magnetic field through the rotor. The relative motion between this field and the rotation of the rotor induces electric current in the conductive

2023-01-18

What is a planetary gearbox, and how does it work?

A planetary gearbox is a mechanical device that mainly consists of a central sun gear, several planetary gearboxes and a ring gear. It achieves a wide range of gear ratios and rotational movements through different gear configurations.

2023-01-18

How does a single phase induction motor work?

Single phase motors work on the same principle as 3 phase motors except they are only run off one phase. A single phase sets up an oscillating magnetic field that goes back and forth rather than a rotating magnetic field. Because of this a true single pha

2023-01-18

What gear ratio is fastest?

The transmission ratio, also known as the speed ratio, is an important index to measure the gear system. The most suitable gear ratio can be determined by considering the purpose of the gear system and your needs.

2023-01-18

How does a induction motor work?

An induction motor or asynchronous motor is an AC electric motor in which the electric current in the rotor needed to produce torque is obtained by electromagnetic induction from the magnetic field of the stator winding. An induction motor can therefore b

2023-01-18

What are the characteristics of the planetary reducer?

The planetary reducer is a mechanical gear system, which mainly reduces the speed and increases the torque. It has the characteristics of high efficiency, stable operation, wide range of speed ratio, durability and strong versatility.

2023-01-18

What is a reduction transmission?

A reducer can adjust the speed and torque of a rotating shaft. Reduction drives are an important part of many mechanical systems, reducing the speed of a rotating shaft while increasing the torque applied to the shaft for a variety of different applicatio

2023-01-17

What is an ac induction motor?

An AC induction motor is a type of electric motor that uses alternating current (AC) to generate torque. These motors are widely used in industrial and residential applications due to their simplicity, ruggedness, and low cost.

2023-01-17

What is laser ablation?

Laser ablation is a laser technology for laser engravers that removes the surface of material using a high-energy laser beam. It is widely used in material surface cleaning and material removal.

2023-01-16

How to make 3d design for cnc router?

3D designing on a CNC router requires the use of a CAD program to create a 3D model of the design, which is then converted into a format that the CNC router control software can read.

2023-01-15

Why three phase induction motor is self starting?

The self-starting of the three-phase induction motor is determined by the operating principle of the three-phase motor. The stator windings of a three-phase motor are arranged in a three-phase configuration and generate a rotating magnetic field that rota

2023-01-13

Engraver helps you get the best NFL viewing experience

The NFL starts on Sept 8, 2022. I believe many fans are more excited. After watching the game, there will definitely be many fans who will buy peripheral products with their favorite teams to express their love, such as jerseys and hats. If you feel these

2023-01-13

Case Study: NMRV40 Turbo Gearbox for Fully Automatic Packaging Machine

In October 2022, a customer engaged in the production of food packaging machines came to the website to inquire about reducers. He wanted to buy a batch of reducers for the company's new packaging machines.

2023-01-12

What is the most important factor in motor selection?

In addition to the wide variety of motors, there are also various types of motors. If the type is not suitable, many problems may occur during use.

2023-01-10